Coefficient of Performance (COP)
The coefficient of performance (COP) is the ratio of useful heat a heat pump delivers to the electrical energy it consumes. A COP of 4 means 4 kWh of heat for every 1 kWh of electricity, which is why a heat pump's electricity demand, and the share solar can cover, depends on it.
The coefficient of performance (COP) measures how efficiently a heat pump turns electricity into heat. It is the heat delivered divided by the electricity consumed. Because a heat pump moves heat from the air, the ground or water rather than generating it, the COP is greater than 1: a unit with a COP of 4 delivers 4 kWh of heat for each kWh of electricity.
It depends on the temperature lift. The further a heat pump has to raise the temperature, from a cold outdoor source to a hot flow temperature, the more work it does and the lower its COP. That is why COP is always quoted with its test conditions, and why the same unit performs better with underfloor heating than with high-temperature radiators.
The seasonal figure is what counts. A single COP describes one operating point. The seasonal coefficient of performance (SCOP), or the seasonal performance factor (SPF, in German the Jahresarbeitszahl) measured on an installed system, averages performance across the year and is the right input for annual consumption.
It links heat to the electricity bill. Divide the building's heat demand by the seasonal COP and you have the heat pump's electricity demand, which is the load a solar system and a battery are sized against.
Why it matters for solar installers
Selling solar and a heat pump together raises the deal size, but the case only holds if the heat pump's electricity demand is modelled honestly. SolarVis models the heat pump from the building's characteristics and the unit's capacity and COP, adds its consumption to the hourly load, and shows how much of it the solar system covers. See heat pump modeling.
Common questions
- What is the difference between COP and SCOP?
- COP is measured at one fixed set of temperatures, for example 7 °C outdoor air and 35 °C flow water. SCOP, the seasonal coefficient of performance, averages performance across a whole heating season with its changing outdoor temperatures, so it is the better guide to annual electricity use.
- What is a good COP for a heat pump?
- Air-to-water heat pumps typically reach a COP of around 3 to 5 at rated conditions, and ground-source units somewhat more. The figure falls as the outdoor temperature drops and as the flow temperature rises, so the same unit performs better with underfloor heating than with high-temperature radiators.
- Why does COP matter for a solar proposal?
- The COP converts the building's heat demand into electricity demand. A lower COP means more kWh to supply, and in winter, when COP is lowest, solar output is lowest too. Both effects decide how much of the heat pump's consumption the solar system can cover.