Finance & Business

Self-Consumption

Self-consumption is the share of a solar system's output that is used on site at the moment it is produced, instead of being exported to the grid. Because a self-consumed kWh replaces a kWh bought at the retail price, it is usually worth several times more than an exported one.

Also known asSolar self-consumptionPV self-consumptionSelf-consumption rateOn-site consumption

Self-consumption is the part of a solar system's production that the building uses directly, at the moment it is generated. The rest is exported to the grid. It is usually expressed as a rate: if a system produces 10,000 kWh a year and the site uses 6,000 kWh of it directly, the self-consumption rate is 60 percent.

It sets the value of the energy. A self-consumed kWh avoids a kWh bought from the supplier at the retail unit price, including the taxes and network charges billed per kWh; fixed standing charges stay. An exported kWh earns whatever the export arrangement pays, which in most markets is now far below the retail price. Under net metering the gap is small; under net billing, a feed-in tariff or no export payment at all, it decides the business case.

It depends on timing, not just volume. Solar output peaks at midday, while many homes use most of their electricity in the morning and evening. Monthly or annual totals hide this mismatch. Only an hourly comparison of generation and load shows how much of the output the site can actually use.

Batteries and flexible loads move it. A battery stores the midday surplus for the evening. A heat pump, an EV charger or a process load scheduled into the solar hours does the same without storage.

Why it matters for solar installers

A proposal that assumes every kWh is worth the retail price overstates savings, and the customer finds out from the first bill. SolarVis simulates consumption and production hour by hour across the year, models a battery in self-consumption mode alongside heat pumps and EV charging, and prices the result against the customer's tariff. See battery modeling.

Common questions

What is the difference between self-consumption and self-sufficiency?
Self-consumption measures how much of the solar output the site uses itself. Self-sufficiency, or autarky, measures how much of the site's total demand the solar system covers. A small system on a large load can reach full self-consumption with low self-sufficiency, and the reverse is also true.
How do you increase self-consumption?
Move flexible loads into the solar hours (heat pumps, EV charging, water heating, process loads), add a battery that stores the midday surplus for the evening, and size the array to the load rather than to the roof. Each measure has a cost, so the right mix depends on the tariff.
Why does self-consumption matter more as export rates fall?
When an exported kWh earns far less than an imported kWh costs, every kWh used on site is worth the full retail price while every exported kWh is worth only the export rate. The lower the export rate, the more the project's savings depend on self-consumption.

Put this to work in solarVis

Further reading

Last updated November 10, 2026
Get started

See solarVis in action

We use cookies to improve solarVis

Necessary cookies keep the site running. Analytics and marketing cookies show us which pages actually help installers and let us measure our ads. We enable analytics and marketing cookies by default to improve this site and measure our ads. You can opt out anytime. Read our Cookie Policy