Consuel
Consuel, the Comité National pour la Sécurité des Usagers de l'Électricité, is the French body that checks new electrical installations and stamps their certificate of conformity. A solar system that exports to the grid needs a Consuel-approved certificate before Enedis can put the connection into service.
Consuel (Comité National pour la Sécurité des Usagers de l'Électricité) is the independent French association recognised by the state to verify the safety of new electrical installations. Its approval on an installation's certificate of conformity, the attestation de conformité, is what allows the network operator to energise a new connection.
For solar, it is the step before connection. A photovoltaic system that injects into the public grid, whether it sells its surplus or its full output, cannot be put into service by Enedis or a local distribution company until the certificate of conformity approved by Consuel has been received. A delay at Consuel is a delay in the customer's first kWh.
It checks the installation against the safety rules. The reference is the NF C 15-100 standard for low-voltage installations, together with the specific requirements for photovoltaic systems. Consuel reviews the technical file the installer submits and can send an inspector to check the installation on site. Defects have to be corrected before the certificate is approved.
The technical file has to match what was built. It describes the installation, its equipment and its protection, and an electrical diagram of the system is part of it. A file that contradicts the installation is one of the usual reasons for a refusal.
Why it matters for solar installers
In France the Consuel certificate is the last gate between a finished installation and an active connection, so a clean technical file saves weeks. SolarVis generates the single line diagram, the schéma unifilaire, from the stringing design and exports it on your own title block as PDF or DXF, so the diagram in the file matches the system you designed. See single line diagram.
Common questions
- When does a solar installation need a Consuel certificate?
- Whenever it injects electricity into the public grid, in surplus sale or full sale. The connection request to the network operator has to be accompanied by the certificate of conformity approved by Consuel, and the operator puts the connection into service only once it has received it. Other new installations can need one too, for example when the work includes a new connection, so check the case before assuming none is required.
- What does Consuel check?
- That the installation meets the electrical safety rules in force, chiefly the NF C 15-100 and, for photovoltaic systems, the specific guides that apply to them. Consuel reviews the installer's technical file and may inspect the installation on site before it approves the certificate.
- Who applies for the Consuel certificate?
- Usually the installer, who completes the certificate of conformity for the installation they built, attaches the technical file and submits it to Consuel. The customer receives the approved certificate, which is then sent to the network operator to complete the connection.