Digital Surface Model (DSM)
A digital surface model (DSM) is a raster map of the height of the earth's surface including everything on it: buildings, roofs, trees and other structures. Solar design software reads it to set the height and slope of each roof face and to find the objects that cast shade on the array.
A digital surface model (DSM) is a grid of elevation values that describes the top of everything on the ground: rooftops, chimneys, trees, neighbouring buildings and the terrain between them. Each cell of the grid holds one height, so a DSM is effectively a 3D snapshot of a place from above.
It is usually built from LiDAR. Aircraft fire laser pulses at the ground and time their return, producing millions of height points that are turned into a regular grid. Photogrammetry from overlapping aerial or satellite images is the other common source.
It turns a 2D outline into a 3D roof. A roof traced on a satellite image has no height or slope. Read against a DSM, each roof face gets its height and pitch, and the model shows where the ridges and valleys are. Subtracting a terrain model gives the height of each building above the ground.
It knows what casts shade. Trees, chimneys, dormers and neighbouring buildings appear in the DSM with their real heights, which is what a shading analysis needs to know which hours each part of the roof is shaded.
Coverage is uneven. High-resolution DSM data is broad in North America and much of Europe and thinner elsewhere, and its age matters: a tree that has grown or a building added since the flight will not be in it.
Why it matters for solar installers
Modelling a roof by hand from a satellite image is slow and the slopes are guesswork. Where high-resolution roof data covers the address, SolarVis detects the roof outline with AI and fits every face to the elevation data, setting height and slope and flagging faces that do not match the terrain for review. See 3D design and simulation.
Common questions
- What is the difference between a DSM and a DTM?
- A digital terrain model (DTM) shows the bare ground with buildings and vegetation removed. A digital surface model includes them. Subtracting the DTM from the DSM gives a normalised surface model (nDSM), the height of objects above the ground, which is what reveals a roof's height and slope.
- Where does DSM data come from?
- Mostly from airborne LiDAR, which measures distances with laser pulses from an aircraft, and from photogrammetry, which reconstructs heights from overlapping aerial or satellite images. Coverage and resolution vary widely by country and region.
- Can a DSM replace a site survey?
- It can replace much of the early survey work for a proposal: roof outline, slopes, heights and surrounding obstructions. It does not show the roof's structural condition, the state of the covering or the electrical installation, so a physical check is still needed before installation.