Operations & Services

Specific Yield (kWh/kWp)

Specific yield is a solar system's annual energy output divided by its peak power, expressed in kWh per kWp. Because it removes system size from the comparison, it shows how well an array performs on its site and lets systems of any size, in any location, be compared directly.

Also known askWh/kWpSpecific energy yieldFinal yieldYield per kWp

Specific yield, also called final yield, is the energy a solar system produces in a year divided by its peak power. A 10 kWp array that produces 10,500 kWh a year has a specific yield of 1,050 kWh/kWp. The number answers a simple question: how many kWh does each kWp of capacity deliver on this site?

It makes systems comparable. Total output scales with size, so it says little about quality. Dividing by kWp removes the size and leaves the factors that matter: the solar resource, orientation and tilt, shading, temperature, inverter sizing and system losses.

The site sets most of it. Climate dominates. The same array produces markedly more in southern Europe or Türkiye than in northern Germany or the UK. Within a region, orientation and shading account for most of the spread between good and poor installations.

It is not the performance ratio. Specific yield includes the weather. The performance ratio divides real output by what the array would produce with no losses on the same irradiation, which isolates the system from the climate. Both are useful, for different questions.

Why it matters for solar installers

Specific yield is the first number a sceptical buyer or a lender uses to check a yield estimate against other quotes. SolarVis simulates annual production hour by hour on the actual roof geometry, with cell-level shading and the chosen modules and inverters, and shows the estimated energy and production losses in the proposal. See 3D design and simulation.

Common questions

What is a typical specific yield?
It depends mostly on the climate and orientation. Well-oriented systems in Germany or the UK often reach roughly 850 to 1,100 kWh/kWp a year, southern Europe and Türkiye often 1,300 to 1,700 kWh/kWp, and shading, poor orientation or high temperatures pull a site below its regional figure.
What is the difference between specific yield and performance ratio?
Specific yield measures output per kWp and so includes the site's solar resource. The performance ratio divides the real output by what the array would produce with no losses on that same irradiation, so it isolates system losses from the weather. A high specific yield can come from good sun rather than a good design.
How is specific yield used in a proposal?
As a plausibility check. If a proposal's yield per kWp is far above what comparable systems nearby achieve, the estimate is optimistic. Customers and lenders increasingly compare it across quotes, so it helps to show the figure and explain where it comes from.

Put this to work in solarVis

Last updated November 10, 2026
Get started

See solarVis in action

We use cookies to improve solarVis

Necessary cookies keep the site running. Analytics and marketing cookies show us which pages actually help installers and let us measure our ads. We enable analytics and marketing cookies by default to improve this site and measure our ads. You can opt out anytime. Read our Cookie Policy